Service Hotline: 86-755-26567140
Products Products
产品列表
SFP+ transceiver SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet  CategoryPart NumberFiberData RateReachWavelengthTX/RXConnectorTemperatureDDMSFP+PXP-1362-10D SMF6.25Gb/s10KM1310nmDFB/PINLC0°C to 70°CDPXP-1362-02D SMF6.25Gb/s≤2KM1310nmFP/PINLC0°C to 70°CDPXPR...
BIDI SFP+ transceivers BIDI SFP+ transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet Category Part Number Fiber Data Rat...
CWDM SFP+  transceiver CWDM SFP+  transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. The transmitter section uses a CWDM multiple quantum well DFB/EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) m...
DWDM SFP+  DWDM SFP+ is specifically designed for carriers and large enterprises that require a scalable, flexible, cost-effective system for multiplexing, transporting and protecting high-speed data, storage, voice and video applications in point-to-point, add/drop, ring, mesh and star network topologies. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz or 500GHz ITU Grid, C Band DWDM wavelength. A guaranteed minimum optical link budget of 23 dB is offered. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet CategoryPart NumberFiberData RateReach...
XFP  Description XFP transceiver is a high performance, cost effective module for serial optical data  communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 850/1310/1550 nm. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and excellent responsivity or APD high sensetivity receiver. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Product list & Datas...
BIDI XFP Description BID XFP transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) or CWDM transmitter and 1270(1330) nm or CWDM receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm or other CWDM DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) or other CWDM detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list &a...
Total94ArticlePage11/16HomePrev...  6789101112131415...NextEnd
Copyright ©2011 - 2021 Plexoptics
犀牛云提供企业云服务
地址:中国·深圳·宝安中心区·宝源路F518时尚创意园15栋3层
Tel:+866-755-26567140
Fax:+86-755-26567140
邮编:330520