Service Hotline: 86-755-26567140
Products Products
产品列表
100G CFP-SR10 The 100GBASE-SR10 CFP module supports link lengths of up to 300m and 400m, respectively over laser-optimized OM3 and OM4 multimode fiber cables. It enables high-bandwidth 100 Gigabit Ethernet optical links over ribbon fiber cables terminated with female MPO/MTP 24-fiber connectors. 120G CXP The 120Gb/s CXP transceiver modules are designed for use in up to 120 Gigabit per second links over multimode fiber. They are compliant with the CXP Specification and IEEE 802.ba 100GBASE-SR10 and CPPI interfaces. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet Category Part Number Fiber Type Data Rate Reach Wavelength TX/RX Connector Temperatur...
40G QSFP+ SR4 PQSFP-SR4C is a 4-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10.3125 Gbps up to 300 m using OM3 fiber or 400 m using OM4 fiber. The module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector, and the optical interface uses a 12 fiber MTP/MPO connector. 40G QSFP+ PSM IR4 QSFP PSM IR4 is a high performance, low power consumption, long reach interconnect solution for 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and 40GbE PSM4. Inside QSFP PSM IR4 is an assembly of 4 full-duplex lanes, where each lane is c...
SFP+ transceiver SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet  CategoryPart NumberFiberData RateReachWavelengthTX/RXConnectorTemperatureDDMSFP+PXP-1362-10D SMF6.25Gb/s10KM1310nmDFB/PINLC0°C to 70°CDPXP-1362-02D SMF6.25Gb/s≤2KM1310nmFP/PINLC0°C to 70°CDPXPR...
BIDI SFP+ transceivers BIDI SFP+ transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet Category Part Number Fiber Data Rat...
CWDM SFP+  transceiver CWDM SFP+  transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. The transmitter section uses a CWDM multiple quantum well DFB/EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) m...
DWDM SFP+  DWDM SFP+ is specifically designed for carriers and large enterprises that require a scalable, flexible, cost-effective system for multiplexing, transporting and protecting high-speed data, storage, voice and video applications in point-to-point, add/drop, ring, mesh and star network topologies. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz or 500GHz ITU Grid, C Band DWDM wavelength. A guaranteed minimum optical link budget of 23 dB is offered. --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Product list & Datasheet CategoryPart NumberFiberData RateReach...
Total29ArticlePage1/5HomePrev12345NextEnd
Copyright ©2011 - 2021 Plexoptics
犀牛云提供企业云服务
地址:中国·深圳·宝安中心区·宝源路F518时尚创意园15栋3层
Tel:+866-755-26567140
Fax:+86-755-26567140
邮编:330520