Service Hotline: 86-755-26567140
Products Products
产品列表
BIDI SFP Transceiver The BIDI SFP transceiver module integrates optics andelectronics in a Small Form Factor Pluggable (SFP) package. It is MultisourceAgreement (MSA) compatible and designed for operation at 1310 nm and 1550 nm.Although optimized for OC-48/STM-16, it provides multi-rate capabilities andcan be used from OC-3/STM-1(155 Mb/s) up to 2.7 Gb/s. MultiRate SFP transceiverprovides a fully OC-48 SONET compliant interface between the SONET/SDH photoniclayer and the electrical layer. Its microprocessor - based modular designimplements all features specified in the SFP MSA compatible 2-wire SerialDigital Diagnostic Monitoring Interface for Optical Transceivers. OC-48 /STM-16 is a network line with transmission speeds of up to 2488.32 Mbit/s(payload: 2405.376 Mbit/s; overhead: 82.944 Mb...
CWDM SFP The CWDM SFP is a compact optical transceiver used in opticalcommunications for both telecommunication and data communications applicationson the CWDM SFP from 1270nm to 1610nm wavelength. It is a popular industryformat supported by several fiber optic component vendors. SFP transceivers are designed to support SONET/SDH, GigabitEthernet, Fibre Channel, and other communications standards SFP transceiversare available with a variety of different transmitter and receiver types,allowing users to select the appropriate transceiver for each link to providethe required optical reach over the available optical fiber. SFP transceiversare commercially available with capability for data rates up to 10 Gbit/s SFP+. ----------------------------------------------------------------------------...
XENPAK DWDM PlexOptics’ XENPAK DWDM transceiver is ahot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to XENPAK MSA. The module isa fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and De-mux with clock and data recovery (CDR). -----------------------------------------------------------------------------------------------------------------------------------------------------------  Product list & Datasheet  Category Part Number Fiber  Data Rate Reach Wavelength  TX/RX Connector Temperature  DDMI DWDMXENPAK PXK-DXX96-80D SMF 10.3125Gb/s 80KM DWDM EML/APD SC 0°C to 70°C Y PXK...
DWDM SFP transceivers DWDM SFP transceivers provide high speed and physicalcompactness that today's networks require while delivering the deploymentflexibility and inventory control that network administrators demand. Our DWDM SFPs are available in all 100 GHz or 50Ghz C-bandwavelengths on the DWDM ITU grid. They are designed according to Multi-SourceAgreement (MSA) standards to ensure broad network equipment compatibility. Asmultirate interfaces they support any protocol from 100 Mbps to 4.25 Gbps, for8G/10G please see SFP+ category. The modules are hot pluggable and digital diagnostic functionsare available via an I2C serial bus specified in the SFP MSA SFF-8472. Themodules meet the requirements of the IEEE802.3 Gigabit Ethernet standard andANSI Fibre Channel specifications, and are su...
Copper SFP1000BASE-T or 10/100/1000BASE-T Autonegotiation can be installedinto optical SFP slots enabling an optical Ethernet port (1000Base-X) to beconverted into a copper Ethernet port (1000Base-T) either in the field or inproduction. RJ45 Transceivers are compatible with Gigabit Ethernet and1000BASE-T standards. For more information, please contact our sales team.-----------------------------------------------------------------------------------------------------------------------------------------------------------  Product list & Datasheet CategoryPart NumberPackage Data RateReachConnectorTemperatureDDMICopperSFPPSF-T12-02-1SFP1.25Gb/s≤2KMRJ45Com./Ext./Ind.NPSF-T12-02-2SFP1.25Gb/s≤2KMRJ45Com./Ext./Ind.NPSF-T12-02-3SFP1.25Gb/s≤2KMRJ45Com./Ext./Ind.NPSF-T12-02-4SFP1....
Gigabit Interface Converter  GBIC is a standard for transceivers, commonly used with GigabitEthernet and fibre channel. By offering a standard, hot swappable electricalinterface, one gigabit ethernet port can support a wide range of physicalmedia, from copper to long-wave single-mode optical fiber, at lengths ofhundreds of kilometers. The appeal of the GBIC standard in networkingequipment, as opposed to fixed physical interface configurations, is itsflexibility. Where multiple different optical technologies are in use, anadministrator can purchase GBICs as needed, not in advance, and they can be thespecific type needed for each link. This lowers the cost of the base system andgives the administrator far more flexibility. On the other hand if it is knownthat a switch will mostly have ...
Total29ArticlePage4/5HomePrev12345NextEnd
Copyright ©2011 - 2021 Plexoptics
犀牛云提供企业云服务
地址:中国·深圳·宝安中心区·宝源路F518时尚创意园15栋3层
Tel:+866-755-26567140
Fax:+86-755-26567140
邮编:330520